We Repair General Electric Monogram, Profile, Eterna Appliances The Right Way in Edmonton

GE appliances were designed to simplify our everyday routine. When breakdowns happen they are an unpleasant surprise. GE Appliance Repair Edmonton Calgary is ready to bring your appliances back to life. In short, we provide our services for appliances of any model. Consequently, for further diagnostic support, visit https://gotechappliancerepairs.ca/contact-us/

For same-day Whirlpool Appliance Repair, Call Us at (780) 994-4333

General Electric Appliance Repair Team

In this video, you will see how our team works, Repair GE Monogram, Profile Home Appliances

GoTech Appliance Repairs – Edmonton Calgary

GE Appliance Repair Edmonton

Edmonton ☎️ (780) 994-4333

Calgary ☎️ (403) 889 -9878

Established Company 

Edmonton GE Appliance Repair Master Technicians 

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: Edmonton, Calgary, Sherwood Park, Devon, St. Albert, Stony Plain, Spruce Grove, Leduc, Beaumont, Fort Saskatchewan, Morinville, and Surrounding Area

Press Arrow “Play Game” and take a chance. Win up to $ 30 discount for your appliance repair.

Press Arrow “Fault Codes” and read about the most common errors of your GE appliances below.

GE Fridge Repair Edmonton - Calgary

General Electric Fridge Repair

A reliable GE refrigerator is a real treasure in your kitchen. So, when it breaks down you want it repaired in the shortest timeframe. Our team provides urgent repairs and replacement services for all GE fridges. Equally, any breakage will be fixed in a safe and reliable timeframe. If the replacement of any refrigerator part is required, our technician will do it on the same day.

Call GE Fridge repair Edmonton All applicable information about what is needed to book a technician. Also, you can schedule a service call by clicking the link below. Fridge Repair  GE Refrigerator technician and the information required to book a diagnostic call.

Check Us GoTech Appliance repair EdmontonTo find out about possible GE refrigerator error code messages please read below.

GE Dishwasher Repair Edmonton - Calgary

Everyday use and other factors cause failures and deterioration of parts of an appliance. Just call us at GE appliance repair Edmonton Calgary. We will send a technician who will fix the problem. It is recommended to not purchase a new dishwasher. This is because our experienced team will prolong operational life. In conclusion, this is better than purchasing a new product. 

Call GE Appliance repair Edmonton All applicable information about what is needed to book a technician. Also, you can schedule a service call is provided by clicking the link below. Dishwasher repair GE Dishwasher technician and the information required to book a diagnostic call.

Check Us GoTech Appliance repair EdmontonTo find out about possible GE Dishwasher error code messages please read below.

General Electric dishwasher Repair

GE - Range, Stove, and Oven: Monogram - Profile - Repair - Edmonton - Calgary

General Electric Stove Repair

When your oven or stove is not working up to a standard to cook your food well. It is important to know who you can call for immediate repairs. Thus, our technicians have vast experience in GE range repairs. In addition, to their professional experience. We can provide same-day diagnostics and repairs. It is also advised to request routine maintenance services. Consequently, this will give you a chance to prevent serious breakage and failure.

Call GE Stove, Oven repair Edmonton All applicable information about what is needed to book a technician. Also, schedule a service call is provided by clicking the link below. Oven,Stove repair  GE Oven & Stove technician and the information required to book a diagnostic call.

Check Us GoTech Appliance repair EdmontonTo find out about possible GE Stove & Oven error code messages please read below

GoTech Appliance Repairs – Edmonton Calgary

GE Appliance Repair Edmonton

Edmonton ☎️ (780) 994-4333

Calgary ☎️ (403) 889 -9878

Established Company 

Edmonton GE Appliance Repair Master Technicians 

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: Edmonton, Calgary, Sherwood Park, Devon, St. Albert, Stony Plain, Spruce Grove, Leduc, Beaumont, Fort Saskatchewan, Morinville, and Surrounding Area

General Electric Appliance Repair Team

GE - Washer Repair Edmonton - Calgary

General Electric Washer Repair

We understand laundry is a time-consuming chore. So, that is why we appreciate washing machines in our lives. Plus, we want them to work correctly for as long as possible. Therefore, at GE appliance repair Edmonton Calgary, a technician will come to your house and get it back to a working state. In addition, our technicians arrive with the necessary tools and spare parts. So, this guarantees your appliance will work for many more years. 

Call GE Washer repair Edmonton All applicable information about what is needed to book a technician. Also, schedule a service call is provided by clicking the link below. Washer Repair GE Washing Machine technician and the information required to book a diagnostic call.

Check Us GoTech Washer repair EdmontonTo find out about possible GE  Washing Machine error code messages please read below.

GE Dryer Repair Edmonton - Calgary

In general, clients do not use the drying machine every day. Nevertheless, drying machines experience wear and tear. And like any other household appliances you need immediate service. Our team provides same-day and next-day repairs. We use only licensed spare parts designed especially for GE dryers. Consequently, after a visit from our specialist, your dryer is ready to use again. Thus, you can enjoy your clothes again.

Call GE Dryer repair Edmonton All applicable information about what is needed to book a technician. Also, schedule a service call is provided by clicking the link below. Dryer Repair GE Dryer technician and the information required to book a diagnostic call.

Check Us GoTech Appliance repair EdmontonTo find out about possible GE dryer error codes messages please read below.

General Electric Dryer Repair
General Electric Repair Van

GoTech Appliance Repairs – Edmonton Calgary

GE Appliance Repair Edmonton

Edmonton ☎️ (780) 994-4333

Calgary ☎️ (403) 889 -9878

Established Company 

Edmonton GE Appliance Repair Master Technicians 

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: Edmonton, Calgary, Sherwood Park, Devon, St. Albert, Stony Plain, Spruce Grove, Leduc, Beaumont, Fort Saskatchewan, Morinville, and Surrounding Area

GE Appliance Repair Edmonton Calgary
Range / Stove / Oven Fault Codes

F0 – Touch pad stuck

  • Normally either the touch pad or oven control (clock or ERC) is faulty and needs to be replaced. If you cannot cancel this fault code, replace the oven control (clock or ERC), touch pad, or both.

F1 – Same Touch pad stuck

  • Normally either the touch pad or oven control (clock or ERC) is faulty and needs to be replaced. If you cannot cancel this fault code, replace the oven control (clock or ERC), touch pad, or both.

F2 – (During BAKE) Control senses oven temperature is above 615F-630F

  • If an actual over temperature condition has occurred. Check for welded relay contacts on broil or bake relays. If this is this case, replace oven control (clock or ERC).
  • If no over temperature condition has occurred. Check for a high resistance connection. Or another cause of high resistance in the oven temperature sensor circuit. Inspect the sensor, sensor harness and the sensor harness connection at sensor and oven control. Replace sensor if faulty.

Remember: The oven control (ERC) measures resistance of sensor circuit, not the actual oven temperature. 

F2 – (While CLEAN) Control senses oven temperature is above 915F-930F

  • If an actual over temperature condition occurred. Check for welded relay contacts. If this occurs, replace the oven control (clock or ERC).
  • If no over temperature condition has occurred. Check for a high resistance connection or another cause of high resistance in the oven temperature sensor circuit. Check the sensor, sensor harness and the sensor harness connection at sensor and oven control. Replace sensor if faulty. Check the door lock switches.

Remember: The oven control (ERC) measures resistance of sensor circuit , not the actual oven temperature. 

F4 – Open or shorted oven temperature sensor (RTD)

  • Check the sensor harness and harness connection between oven sensor and oven control.
  • Replace the oven temperature sensor (RTD) if the wiring is ok.

F5 – Relay drive circuit loss

  • If this fault code cannot be cancelled, replace oven control (clock or ERC).

F8 – Meat probe short

  • Problem could be with the probe, receptacle or the probe circuit. Check the probe.
  • Check for a pinched wire.
  • Inspect for condensation or contamination on the probe receptacle.

F9 – Lock switch

  • Check the wiring to door lock switch (the wire harness could be connected wrong).
  • Check for a stuck lock switch.

FC – Door lock circuit problem such as pinched wires between door lock and control switches on motorized lock circuits

  • Check the wiring and test operation of switches.

FD – Meat probe shorted

  • Problem could be with the probe,  receptacle, the or probe circuit. Check the probe.
  • Check for pinched wire. Inspect for condensation or contamination on probe receptacle.
  • Replace probe if all else looks ok.

FF – Door motor safety switch loss

  • Replace oven control (also called clock or ERC).

FFF – Control error, failed EEPROM

  • Replace oven control board (also called clock or ERC).
  • The main control is responsible for operating a series of software commands. Which control different features and functions of the oven. Each function or operation has a numerical value assigned to it. These numerical values can be added up and this is called the check sum operation. Each time the system is powered up and after every clean cycle. The system performs a check sum and compares the value to that programmed into the software (stored in memory).
  • An EEPROM check sum error or FFF code occurs when these two values differ. If this occurs, replace the oven control board (clock or ERC).

GE Monogram & Profile Dishwasher error codes

F2Communication failure between the user interface control and the electronic control board

F3Inverter control board configuration error

F5Inverter control board communication failure

F16High water temperature

F33Door switch failure

F34Water leak detected

F35Diverter feedback error

F48, F49 or F52Turbidity sensor failure

F50 or F51Temperature sensor failure

F64Inverter error

F65No water detected by the inverter control board

F80 or F96No water detected by the turbidity sensor

F97Heater failure

F98Not draining

F99Minimum wash temperature not met

F112Stuck key pad button

F128Low rinse agent level

F144Inverter control board failure

F145Inverter control board not getting AC power

F146Circulation pump failure

F147Drain pump failure

F148Wire harness thermal cut-off fuse is blown

F149Inverter control board wire harness failure



GE Monogram & Profile, Eterna Refrigerator error codes

FFCheck frozen foods for warming up. Because the temperature is rising too high.

PFPower has been interrupted

CI Ice maker not operating properly

dEDefrost system error

CCFreezer temperature is too warm

Repair the Hood Fan Repair

1 flash – Motor failure

2 flashes – Slipping drive belt or loose hub nut on the spin basket

3 flashesDefective inverter control

4 flashes – Mode shifter circuit failed

5 flashesMotor failure

6 flashesLocked rotor on the drive motor

7 flashes – Lid didn’t open for 4 consecutive cycles

8 flashes – Motor overheated

9 flashes – Motor brake mechanism is non-working

GE Monogram & Profile, Eterna Washer Error Codes

GE Monogram & Profile dryer error codes

000No errors

001 or 003Temperature sensor is defective

002 or 004Temperature sensor is defective

005The main control board is defective

006Stuck button on the control panel

007Power supply is mis-wired

008 or 00dDoor switch not opening; 5 cycles ran without the door switch opening

009Drive motor problem

Play Game and Get Up To $ 30 Discount


Select Level:
{{ currentLevel.width }}x{{ currentLevel.height }}
{{cell.letter}}

Recent Customer Reviews

by Marla Yaworski on GoTech Appliance Repairs

I had a washing machine that was having issues. I had previously contacted another company, who took 1.5 hours to diagnose the problem and then inform me that it could not be fixed until late December, and with a smirk, I was handed a quote for the job. I happened to come across this company quite by chance. I booked an appointment time and was sent a text previous to the arrival time to confirm. The technician, John, was amazing. He arrived on time and was extremely conscientious about donning gloves and a mask for safety. I left him to find the problem, but in less than 5 minutes he had a diagnosis. He showed me how to access the error codes on my machine and then continued to explain what the problem was. He had the machine fixed in less than an hour. I was extremely impressed. When chatting, I discovered that he also repairs Samsung appliances. I have called so many companies that refuse to repair these. Again, in very little time, John diagnosed and explained the problem. He not only fixed my fridge but took out all of the food, cleaned out the water from inside, replaced the food, and vacuumed the entire area. The cost of fixing both my washer and my fridge was less than the quote I received from the other company to repair only my washer. The service, expertise, and value are outstanding. I am so happy, I found this company and would highly recommend them.

by Kent Henderson on GoTech Appliance Repairs
GoTech Appliance Repairs

Our refrigerator was warming up quickly and of course it was 5:00 PM. I called GoTech and they had John on his way and at our house before 7:00. John was fantastic. He explained how the refrigerator works, and what he believes the problem may be. He stayed until the job was done and even offered to help us put our shelves back in etc. I would highly recommend this company and will most definitely use them again in the future.

great job

These guys were great! Quick service upon booking. They were courteous, knowledgeable, prompt and we really appreciated the Covid-19 precautions. This business card is a keeper for future repairs.!

GoTech Appliance Repairs

As others here have said, the service quality is all you wish for - knowledgeable, friendly, professional. John made my house feel like a home again. Thank you. If there are any future problems with my appliances, I will certainly call this company for help.

Thanks for taking the time to share your feedback with us.

Excellent Service

We had the water dispenser repaired on our fridge the other day, and the service was outstanding. Sarah was patient in making sure that she was quoting me the correct price on the part that was to be fixed (she asked for photos to be accurate), and explaining that the repair date had to be delayed due to the holiday so the tech could pick up the part (if not for the holiday the tech would have been there that afternoon). David was an efficient, and polite professional, explaining everything, and carrying on conversation throughout it all. There were no billing surprises, and the work completed was top notch. Highly recommend them, and will call them again if I need another repair.

We're glad you enjoyed your experience with our company and appreciate you taking the time to leave a review

Page 1 of 7:
«
 
 
1
2
3
 
»
 

Do You Have A Broken GE Appliance in Edmonton - Calgary ?

Pick Up The Phone And Call Us!