E01, E02, E03, E04, E05 – it means that the dishwasher has suffered a power module failure.
E06 – Door mechanism problem.
E07 – Dishes not drying due to faulty fan.
E08 – Water is not filling above level of heating element.
E09 – Water heating problem. Most likely related to heating element.
E10 – Heating element problem.
E11 – Thermostat or temperature sensor faulty.
E13 – Water temperature exceeding 75C
E14 – Reed switch flow sensor fault
E15 – Water leaking through to dishwasher base.
E16 –Water inlet valve fault.
E17 – Water level too high (overfill).
E18 – Water level too low (underfill).
E20 – Electrical short or break.
E21– Circulating pump blocked.
E23 –As error code E20, but this time the electrical problem is with the drain pump.
E24 – Dishwasher not draining properly.
E25 – Dishwasher not draining properly.
E26 –Water switch/regulator problem.
E28 – Fault detected with turbidity sensor.
A or B – Fault with the water sensor.
C – Motor tacho fault.
D – Wiring/electrical fault related to motor triac.
E – Diverter valve fault.
F – Fill timeout. The required water level is not sufficient within six minutes of the start of the programme.
G – Diverter triac fault.
H – Dishwasher not heating.
K – Faulty thermostat sensor (NTC).
0 – Pressure sensor fault.