Maytag Appliance Repair Edmonton

Maytag Appliance Repair Edmonton

Maytag appliance repair in Edmonton

Maytag Appliance Repair Edmonton, All household appliances play an important role in the everyday life of their owners.  When buying them, we want them to simplify our lives. However, it happens that they may fail from time to time. GoTech Appliance Repairs, as a team of professionals, is ready to come and help in any house in Edmonton and the surrounding areas.

What are the advantages of GoTech Appliance Repairs?

The main advantage that helps us to stand out from the crowd is our extensive 15 years of experience. Such a skilled team does not know unmanageable issues. We purchase the best and licensed spare parts to repair Maytag appliances. Our specialists are always well-supplied with everything necessary tools. We are available 7 days a week in Edmonton and the surrounding areas. All these enable us to provide same-day services. GoTech also provides all the clients with a satisfaction guarantee for up to12 months. One more important thing is that we have affordable rates.

Additionally, for further information about our services, please visit  👉Appliance Repair Edmonton – GoTech 

Maytag appliance repair in Edmonton
Maytag Appliance Repair Team

In this video, you will see how our team works, Repair Maytag Home Appliances

In this video, you will see how our team works, Repair Maytag Home Appliances

GoTech Appliance Repairs – Edmonton

Maytag Appliance Repair Edmonton

Edmonton ☎️ (780) 994-4333

Established Company 

Edmonton Maytag Appliance Repair Master Technicians 

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: Edmonton, Calgary, Sherwood Park, Devon, St. Albert, Stony Plain, Spruce Grove, Leduc, Beaumont, Fort Saskatchewan, Morinville, and Surrounding Area

Press the Arrow “Play Game” and take a chance to win up to a $ 30 discount for your appliance repair.

Press the Arrow “Fault Codes” and read about the most common errors of your Maytag Appliances below.

Maytag Appliance Repair Edmonton - Fridge Repairs

Maytag Fridge Repair

The most widespread problem is that the refrigerator is not cooling well enough. Here are the top reasons that may cause such a problem: condenser fan motor or evaporator fan motor failure, defective start relay, temperature control thermostat or temperature control board failure, dirty condenser coils, compressor or thermistor failure. Thus, there are many reasons that may lead to defective work of a refrigerator. It may need a repair or replacement that can be done by experienced and fully equipped technicians only.

⚠️For Pricing and to Learn more about Booking an Appointment, For Fridge Repairs follow this link:


👉https://gotechappliancerepairs.ca/fridge-freezer-repair/

  Read below for information on Maytag Fridge error codes.

Maytag Fridge Repair

Maytag® EPIC z™ Gemini, Stove and Oven Repairs Services

Maytag Stove Repair

For those who love cooking at home, an oven is an essential assistant. It is obvious that after some period of usage, oven parts will need to be replaced. It is dangerous to repair an oven by your own means. Then call us and we will fix the problem in any part of Edmonton, Calgary, and the surrounding areas. The reasons might be the following: defective igniter, blown thermal fuse, loose wire connection, failed relay board or safety valves, broken temperature control thermostat. Maytag appliance repair Edmonton Calgary will remove defective parts and provide the repair services for long-lasting results.

You will be happy that you have called our company. Our well-equipped team guarantees the very best services at a reasonable price in Edmonton, Calgary, and surrounding areas.

⚠️For Pricing and to Learn more about Booking an Appointment, For Stove Repairs follow this link:


👉https://gotechappliancerepairs.ca/stove-and-oven-repair/

 Read below for information on Maytag Gemini Stove & Oven error codes.

Maytag® EPIC z™ Dishwasher Repair Services

Dishwasher Repair Maytag

Maytag is world-renowned for its powerful motors and strong stainless steel interiors. Its motors can wipe grime and leave your dishes looking better than new. But with any strong motor, it needs general repair and maintenance to keep it running smoothly. We offer a wide range of services, including repair, maintenance, and replacement services to keep your dishwasher running for many more years to come. 

Below are links and information to get you started with either booking a technician or reading up on possible error codes.

⚠️For Pricing and to Learn more about Booking an Appointment, For Dishwasher Repairs follow this link:


👉https://gotechappliancerepairs.ca/dishwasher-repair/

  Read below for information on Maytag dishwasher error codes.

Dishwasher Repair Maytag
Maytag Appliance Repair Team

GoTech Appliance Repairs – Edmonton

Maytag Appliance Repair Edmonton

Edmonton ☎️ (780) 994-4333

Established Company 

Edmonton Maytag Appliance Repair Master Technicians 

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: Edmonton, Calgary, Sherwood Park, Devon, St. Albert, Stony Plain, Spruce Grove, Leduc, Beaumont, Fort Saskatchewan, Morinville, and Surrounding Area

Maytag Appliance Repair Edmonton -Dryer Repairs

Maytag Dryer Repair

A dryer together with a washing machine creates a perfect tandem. If your dryer does not start working, heat, or heat too much, or tumble, it came time to call GoTech Appliance Repairs. The improper work of your dryer may damage your clothes. For that reason, stop using your dryer when you notice that something is wrong. Our team specializes in fixing both gas and electric drying machines. We also have all the necessary parts for all Maytag dryer models.

⚠️For Pricing and to Learn more about Booking an Appointment, For Dryer Repairs follow this link:


👉https://gotechappliancerepairs.ca/dryer-repair/

Read below for information on Maytag Neptune, Atlantis, Dryer error codes.

Maytag Dryer Repair

Maytag Appliance Repair Edmonton - Washer Repairs

Maytag Washer Repair

It is difficult to imagine modern life without a washer. It is definitely a must-have in any house. If your washer does not start working or working too loud, it’s not draining properly or water is leaking while washing, or your washing machine has a bad odor, you need qualified assistance. There are reasons why your washer is not working. Among them are loose or broken drive belt, obsolete door latch, defective motor control board, tear clutch, defective drive pulley, the defective drive motor or basket drive, or defective water transition. GoTech Appliance Repairs has the necessary experience and certified spare parts to fix the problem of Maytag Neptune, Atlantis, Appliances washing machines.

⚠️For Pricing and to Learn more about Booking an Appointment, For Washer Repairs follow this link:


👉https://gotechappliancerepairs.ca/washer-repair/

Read below for information on Maytag Neptune, Atlantis, washer error codes.

GoTech Appliance Repairs – Edmonton

Maytag Appliance Repair Edmonton

Edmonton ☎️ (780) 994-4333

Established Company 

Edmonton Maytag Appliance Repair Master Technicians 

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: Edmonton, Calgary, Sherwood Park, Devon, St. Albert, Stony Plain, Spruce Grove, Leduc, Beaumont, Fort Saskatchewan, Morinville, and Surrounding Area

Maytag Repair Van

Fault Codes Maytag® EPIC z™ Appliance

Fault Codes Maytag® EPIC z™ Appliance

Fault codes usually indicate a specific problem. However, in many cases, a faulty timer (ERC or Electronic Range Control) can result in an incorrect fault code. Our team of technicians is experienced in repairing most timers and we know how to get to the bottom of any Maytag issue. Review the Maytag fault codes below to stay on top of any issue that may arise.

F0 – Stuck function key

  • Replace the touchpad or if touchpad is part of the clock, replace the clock (ERC).

F1 – Touchpad or clock (ERC) defect

  • Replace the touchpad or clock (ERC). The touchpad is a more common problem. Refer to F1 test at the top of this page for further information.

F2 – Oven temperature too hot

  • Replace the relay board, if present, or the oven temperature sensor (RTD). Check sensor harness.

F3 or F4 – Shorted or open oven temperature sensor (RTD)

  • Check the sensor harness and harness connection between the oven sensor and oven control. Replace the oven temperature sensor (RTD) if the wiring is ok.

F5 – Watchdog and hardware conflict

  • Replace the clock (ERC).

F7 – Function key stuck or shorted

  • Replace the touchpad or if the touchpad is part of the clock, replace the clock (ERC).

F8 – Analog / Digital problem

  • Replace the clock (ERC).

F9 – Door latch

  • Check the door latch components.

Maytag® EPIC z™ Neptune, Atlantis, Dryer Fault Codes

PFPower Failure
Power failure while the dryer was in cycle. Press the Stop button to clear the display. If you experience common power failures on your dryer be sure to check the electrical outlet cord.
Part to replace – Outlet Cord

 F01Main Electronic Control Board Fail
Remove the dryer from power for 10 minutes. Apply power back to the dryer and if the code returns you need to replace the main electronic control board.
Part to replace – Main Electronic Control Board

F02Keypad or User Interface Fail
A button on the keypad may be stuck on one of the user interface controls. If the button cannot be unstuck then replace the user interface control assembly.
Part to replace – User Interface Control Assembly

F22Exhaust Thermistor (Temp Sensor) Fail
Remove power from the dryer. Use a multi-meter and check the resistance of the thermistor (0,000 ohms). If the thermistor is bad then replace it.
Part to replace – Thermistor (Temp Sensor)

F23Exhaust Thermistor (Temp Sensor) Fail
Remove power from the dryer. Use a multi-meter and check the resistance of the thermistor (0,000 ohms). If the thermistor is bad then replace it.
Part to replace – Thermistor (Temp Sensor)

F26Drive Motor Fail
Remove power from the dryer. Check wiring connections between the main electronic control board and the drive motor. If the wiring connections are not damaged and connected then replace the drive motor.
Part to replace – Drive Motor

F28Moisture Sensor Fail
Remove power from the dryer. Check the wiring harness on the moisture sensor visually and with a multi-meter. If the wiring connections are okay then replace the moisture sensor.
Part to replace – Moisture Sensor

 F29Moisture Sensor Fail
Remove power from the dryer. Check the wiring harness on the moisture sensor visually and with a multi-meter. If the wiring connections are okay then replace the moisture sensor.
Part to replace – Moisture Sensor

Maytag® EPIC z™ Neptune, Atlantis, Washer Fault Codes

Maytag-Washer-Error-Codes

nd – The water level fails to drop below the Low Water level reset within 15 minutes, before a spin begins. 

LODoor failed to unlock after 3 attempts. 

nF – Continuous fill of 12minutes. Total fill of 14minutes. 

FL – Door failed to lock after3 attempts. 

LE Water sensor level fault. 8
OE A fault is detected in the water level sensor. Data (frequency) shows the water level is at or above the overflow level.

E-E2 – Detected a key pressed more than 30seconds, the key will be assumed to be stuck. 

dc – Never exceeded 400rpm due to an unbalanced load. 

od The door has not been opened after two complete wash cycles. Door switch was not seen open since the last two final spins. 

dL – Open door lock switch with motor running. 

dS – Door switch is read as open and the door locked switch is read as locked. 

bE – Motor tach signal exists without motor running. 

tEAbnormal high/low temp or ohm resistance seen. 

E3 – Machine control is attempting to drive the motor but is not seeing any tach response. Visual check shows motor is not moving. (Locked, Hall Sensor fault) 
Sr – System Relay failure. 

HrHeater Relay failure. 

Fridge Error Codes

1-1Stuck relay on the electronic control board

1-2All the LED’s are on because the user interface control is incompatible with the electronic control board

2-1Stuck button on the user interface control

2-2User interface control can’t communicate, with electronic control board,

3-1Thermistor/OWI sensor failure (The thermistor is the water temperature sensor, the OWI sensor is the Optical Water Indicator that detects the amount of debris in the water.)

3-2Shorted thermistor/OWI sensor.

3-3OWI failed to calibrate or the drain hose check valve failed, allowing dirty water to backflow into the dishwasher

4-3Communication error between the electronic control board and the circulation pump motor

5-1Door switch failure

Fridge Error Codes

5-2Control detects door not opening

6-1Won’t fill

6-2Water inlet valve failure

6-3Suds or air are in the water pump

6-4The float switch is open

6-6Incoming water is too cold 

6-7Disconnected or damaged flow meter

6-8Problem with water softener regeneration valve (Water Softener Models Only),

7-1Heating element doesn’t work 

7-2Heating element won’t shut off

8-1Slow drain

8-2Drain pump electrical problem

8-3Drain pump stuck on

10-1Detergent dispenser failure

Play Game and Get Up To $ 30 Discount


Select Level:
{{ currentLevel.width }}x{{ currentLevel.height }}
{{cell.letter}}

Recent Customer Reviews

LG Stove

Booking was quick and easy. Dennis the service man was here within a few hours, was quick and efficient. Knew exactly what was wrong. He did not have the part with him but went and picked it up and completed the job.

Freezer

What a pleasant person Mike is. He was here when he said he would be and worked quickly and explained the problem clearly. I would definitely refer him/and the company to anyone . Thank you.

Awesome service!

Booking was quick and easy. Service Technician was John - he went above and beyond to get things running. Highly recommend Go Tech and especially John for all your appliance needs. Thank you.

Freezer repair

Goolged Maytag Fridge repair Edmonton and this business came up, Called this morning at 9am to schedule a tech visit, thinking it would be a few days to get one, surprise #1 available at 1pm today, booked appt, surprise #2 tech called to see if he could come early! of course i said yes, tech arrived around 11-1130, showed him video of the noise the freezer was making and he knew immediately what it was, Tom was quick, professional and cleaned as he went, explained everything ahead of time and was in an out in an hour. Will be calling again when we need a repair..

Unfortunately we were abruptly turned away by a very incompetent customer service person. It was very rude and unwarranted. I recommend that this person be reprimanded and required to take upgrading in proper customer service techniques.

Page 1 of 9:
«
 
 
1
2
3
 
»
 

Do You Have A Broken Maytag Appliance in Edmonton ?

Pick Up The Phone And Call Us!