GoTech Appliance Repairs "Hot Tub Repair” service is always ready to Help !

Hot Tub repair team edmonton

Hot Tub Repair Edmonton: The spa system we like to call the  “Hot Tub”, with all its advantages, needs periodic maintenance. A Hot Tub can fail due to various reasons, and contacting GoTech Appliance Repair Edmonton using our “ hot tub repair ” service will be the best solution needed to repair your Hot Tub. An Edmonton Hot Tub Technician will promptly perform professional repairs, which will help to maintain the efficiency of the Hot Tub for many more years. 

Potential Causes of Hot Tub Breakdown

Even the products of well-known brands of Hot Tubs are subject to regular issues and wear and tear. Thus, issues such as hard water, power surges, and heavy chemical maintenance often lead to breakdowns. Even a minor issue with the functionality of the hydro massage system needs to be repaired. Otherwise, there is a risk of failure leading to more extensive repairs and parts.

During the operation of the Hot Tub, breakdowns occur for the following reasons:

  • Errors when installing or connecting the hydro massage system
  • No reduction gear for adjusting the water supply pressure
  • Clogging of pre-installed filters for water purification from impurities
  • Power failure or short circuit caused by water leakage
  • Failure of shut-off mechanisms for cold and hot water supply
  • Drying and delamination of rubber sealing inserts
  • Clogging of the water drain system from the Hot Tub
hot tub spa repairing edmontom

Step-by-step instructions for repairing the hot tub

Our Technician will know everything about hot tub systems and will quickly cope with any malfunction. In addition to professional repairs, we will use original spare parts we keep in stock. 

hut tud repair edmonton

To troubleshoot problems and repair the hot tub, our technicians perform the following types of work:

  1. Diagnostics of plumbing and determination of repair volumes
  2. Eliminates scratches and cracks that have occurred on the surface 
  3. Cleaning the injectors from clogging and replacing the sealing pads
  4. Replacement of damaged and depressurized hoses
  5. Elimination of leaks in the places of connection to the water supply system
  6. Repair of the mixer, watering can, and excess water drain system
  7. Restoration of the hydro massage control electronics
  8. Repair of a pump, compressor, and pump system
  9. Replacement of sensors, protection relays, and valves

Accurate troubleshooting by our specialists will eliminate unnecessary costs and reduce repair time. To understand the causes of the problems, you will need knowledge of the features. Our technician can easily perform repairs of any complexity and provide a guarantee for the work done.

The repair of the hot tub should be entrusted only to a trusted company. GoTech Appliance Repair’s “hot tub repair” service in Edmonton operates on weeknights and weekends as well as our daytime schedule, this will eliminate the long wait for technical assistance. Our customers rely on our services, the quality of which guaranteed. You can place a call directly on the website or by calling (780) 994-4333.

GoTech Appliance Repairs 

Tot Tub Repair Edmonton & Surrounding Area

Edmonton  (780) 994-4333

Established Company 

GoTech – Appliance Repair ” Hot Tub Repair “

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: St. Albert, Devon, Edmonton, Calgary, Sherwood Park, Stony Plain, Spruce Grove, Leduc, Beaumont, Fort Saskatchewan, Morinville, and Surrounding Area

How the Hot Tub Functions

hut tub repair st albert

In simple words, a hot tub is a large bath with water, which has built-in nozzles for supplying water and air under low pressure, creating pleasant bubbles that massage the body. Sometimes there are also special removable devices for supplying air to an ordinary bath, but today we are talking about full-fledged hot tub systems that require complex installation and qualified maintenance.

The hot tub includes many elements: an intake valve, a pump with an engine, injectors, nozzles, and other parts. Usually, the repair of a hot tub is associated with the replacement of one or more of these elements, which for one reason or another have failed.

The inlet valve, through which water is supplied to the tank, is a rounded device with a special screen, located approximately in the middle between the base and the edge of the tub. For the hot tub to work, the water in the tank must be higher than the intake valve. The suction power of the pump draws in water, while the valve screen prevents bath accessories and other objects that accidentally fall into the water from being sucked in with the water.

Best Edmonton Hot Tub Repair Services

The hot tub air intake valve is located at the bottom of the hot tub, and on top of it is a fine mesh. This valve uses a pump to draw air into the engine and lift it into the hot tub. The water is then sucked in and out through the engine, mixing water and air. The first sign that there may be something wrong with the hot tub air intake system is water leaking from the pipes that are part of the valve.

Such leaks must be eliminated before the water gets on the surrounding wood paneling or floors. Installation of the hot tub air intake valve can be difficult to repair, GoTech Appliance Repairs “hot tub repair” service, always find the most acceptable and optimal option for the client both in terms of cost and functionality.

Identifying the cause of the leak

The first thing to do is to find the source of the leak. Sometimes the pipe may loosen, or the valve itself may crack. Any of these issues can be easily tracked. To do this, you need to turn on the hot tub, find the place where the water drips, and then drain the water from the tub and unscrew the screws that hold the mesh screen of the air intake in place. Next, we will inspect the area where the water drop occurred until we find the problem.

hut tub repair

Dismantling of the pipeline or jets

There are several small plastic pipes under the mesh screen. These pipes are a system that delivers air and water to and from the hot tub. If they are loosened or disconnected from their fastenings, this is the cause of the leak. If we find a leak in one of the pipes, we will advise you to replace a pipe completely. This is quite easy to do by removing the old piece of pipeline from the connections and installing a new pipe. This pipe will be supplied by the technician as needed.

Replacement of Hot Tub jets

The piping system in the hot tub includes several tub jets, which also need to be replaced. They can be damaged as a result of wear and tear.  This step of repairing hot tub jets is simple enough – replacing them is easy by simply removing any loose jets and inserting new ones in their place.

Hot Tub Repair Sherwood Park

Hot Tub Circulation Motor Repair

To replace the circulation motor, you need to unscrew it from the location, and completely remove it, unhooking the pipes and the pump motor. Then you need to insert a new one in its place, making sure that it is directed upwards, and then – attach the pipes and the engine system that were removed from the old device.

Now the repair can be considered almost complete, it remains to check the performance of the hot tub. To do this, you need to screw the fine mesh cover and start the system to make sure that everything works correctly without leaks and other problems.

GoTech Appliance Repairs "Hot Tub Repair” service is always ready to assist

If you do not understand the principles of the operation of the hot tub, do not try to solve the problem in the operation of the hot tub yourself. It is better to call a qualified master as soon as possible or use the services of a private hot tub repair specialist. We are always happy to answer your calls and messages and promptly go to the specified address along with the necessary tools. You can trust us to solve any problem thanks to our extensive experience and expertise in this field.

Author: Yevgen Zayets

GoTech Appliance Repairs 

Tot Tub Repair Edmonton & Surrounding Area

Edmonton  (780) 994-4333

Established Company 

GoTech – Appliance Repair ” Hot Tub Repair “

Technicians available for same-day or next-day service

Professional technicians trained by manufacturer standards

Service provided: St. Albert, Devon, Edmonton, Calgary, Sherwood Park, Stony Plain, Spruce Grove, Leduc, Beaumont, Fort Saskatchewan, Morinville, and Surrounding Area

GoTech Appliance repairs -google-reviews
readers-choice-GoTech Appliance repairs
3-best-rated-GoTech Appliance repairs
GoTech Appliance repairs- repair-home-stars